•  

    GAMMA COLONNE II

  •  

    GAMMA COLONNE III

  •  

    MULTILIFT

  •  

    MULTILIFT S

GAMMA COLONNE II

The successor to the GAMMA COLONNE with further-reduced fitting dimension and cable outlet at the top end of the lifting column. Optional equipment with potentiometer. For use in hospital and care beds.

  • Load capacity:
    max. 1500 N as central load
    max. 700 N at 400 mm lever arm length
  • Adjustment speed: max. 17 mm/sec. *
  • Stroke length: 380 mm
  • 3-part aluminium column, 2-stage telescopic upwards, inner profiles telescope outwards
  • Equipment options: potentiometer, base plate for direct screw connection, cable exit at the bottom, potential equalization between upper and lower mounting plate

 

* depending on drive configuration at constant 24/29 V without load

Standard configurations

Performance data
Load capacity max. 1500 N as central load
max. 700 N at 400 mm lever arm length
Adjustment speed 1 max. 17 mm/sec.
Stroke length 380 mm
Fitting dimension 333 mm
Duty cycle 2/18 min. or 10 %, max. 5 switching cycles per minute
Motor voltage maintenance-free 24 V DC motor
Components
Limit switch with micro switch
Guidance profile aluminium anodised
Housing colour light grey RAL 7035
Motor connecting line grey, straight, 1950 mm, LSP-plug, PVC
grey, spiralled, 760 mm, LSP-plug, PVC
grey, straight, 1550 mm, LSP-plug, PVC
Further data
Protection type IPX4
Protection class III
Relative humidity 30% – 75%
Ambient temperature +10°C - +40°C

Extra configurations

Components
Position feedback potentiometer
Motor connecting line grey, straight, 1600 mm, 8-pole DIN-plug, PVC
Further data
Assembly options fitting sleeve
Equipment options base plate for direct screw connection, cable exit at the bottom, potential equalization between upper and lower mounting plate

1 depending on drive configuration at constant 24/29 V DC without load

Datasheet

Request 3D cad data: Please contact an office next to you

Note: Responsibility for DEWERT products when used for specific applications and for adherence to the appropriate guidelines, standards and laws is borne by the manufacturer of the complete system into which DEWERT products are fitted. We accept no liability for the correctness.

CE declaration of conformity:
We herewith declare that the actuator described above complies with the basic requirements of EC Guideline 2014/30/EU and EC Guideline 2014/35/EU in terms of its conception and design as well as the version we have placed into circulation. We would be glad to help you in having your end products inspected by certified testing companies such as TÜV, LGA, UL, JET, LNE etc.